installation and maintenance
Points to Note
From the perspective of use, to ensure that the bearing can work reliably, pay attention to the following points:
1. Improve the quality of lubrication, control the pressure, temperature and flow of oil, and strengthen oil filtration.
2. Use fuel and lubricating oil that meet the regulations.
3. It is unfavorable to control the temperature state of the diesel generator set, and it is unfavorable to work under the condition of supercooling and overheating. In cold weather, the diesel engine should be preheated before starting, and the crankshaft should be turned by hand to allow the oil to enter the friction surface.
4. The surface quality and geometry of bearings and journals should be strictly guaranteed.
5. The bearing clearance should be appropriate. If the generator set is too large, it will cause shock. If it is too small, the lubrication will be poor and the tiles may burn.
How to ensure the reliable operation of the bearing
Generally speaking, from the perspective of use, the following points should be paid attention to:
1. The bearing clearance should be appropriate, if it is too large, it will cause impact, and if it is too small, the lubrication will be poor, and the tile may be burned;
2. The surface quality and geometry of bearings and journals should be strictly guaranteed;
3. Improve lubrication quality, control oil pressure, temperature and flow, and strengthen oil filtration;
4. Use fuel and lubricating oil that meet the requirements.
In order to give full play to the bearing and maintain its proper performance for a long time, it is necessary to do regular maintenance (regular inspection). Early detection of failures and prevention of accidents through appropriate periodic inspections are important for improving productivity and economy.
