Installation of hydraulic seals:
1 Check that the piston, cylinder barrel and related surfaces where the guide sleeve is installed are sufficiently clean, free of burrs and edges.
2 The installation tool should be smooth, without edges and sharp corners to ensure that the seal will not be damaged in any form during the installation process (Othello's OTH-0003 special installation tool for hydraulic seals is recommended).
3 When installing, a small amount of grease can be placed on the relevant surface of the seal and the cylinder to facilitate installation, but no grease is allowed to remain between the rubber elastomer and the sliding seal ring, otherwise it will affect the sealing performance.
4 Whether it is vertical or horizontal installation, the coaxiality of the piston and the cylinder should be maintained. Excessive eccentricity may damage the seal.
5 The installation speed should not be too fast, otherwise the seal will be damaged.
