Home>Products> Hydraulic Seals > Semi Finished Products

Filled PTFE Tubes

Name: Filled PTFE Tubes
Brand: Kintowe
SKU: 166742469

Kintowe PTFE tubes are filled with glass fibers, carbon fibers, carbon, graphite, molybdenum sulfide bronze or organic fillers. Fillers are used to achieve a multiple of the material's original wear resistance and thermal conductivity as well as a significant reduction of cold flow under load and reduction of thermal expansion

Send Inquiry

Description

In most situations, PTFE is the perfect fluoroplastic for a wide range of applications. Though when virgin PTFE is not sufficient, you can choose for PTFE with a filler to obtain better properties.

Product parameter

PTFE with fillers	Influence of fillers	Filler content in % of weight	Limits of use
PTFE filled with glass fibers	High Pressure And Wear Resistance As Well As Better Thermal Conductivity Very Good Chemical Resistance Good Dielectric Properties	up to 40%	resistant to organic solvents, non-resistant to alkaline solutions and acids
PTFE filled with carbon fibers	Very Low Deformation Under Load Good Wear Resistance, Even In Water Higher Thermal Conductivity And Lower Thermal Expansion Than Glass Fibers Very Good Chemical Resistance	up to 25%	carbon fibers are chemically inert
PTFE filled with carbon	High Pressure Resistance And Hardness Good Sliding Properties And Wear Behavior Good Thermal Conductivity Good Chemical Resistance Low Volume And Surface Resistivity Electrically Conductive	up to 35%, also in combination with graphite	compound is brittle filler may be attacked by oxidizing media
PTFE filled with graphite	Good Lubricating Effect Low Friction Coefficient No Static Charging Good Thermal Conductivity Very Good Chemical Resistance	typically up tp 5%, in exceptional cases up to 15%, also in combination with glass fibers or carbon	high abrasion when used with hard metals, is attached by oxidizing media
PTFE filled with molybdenum disulfite(MoS2)	Good Sliding Properties And Wear Behavior Good No-Lube Operation In Combination With Bronze	up to 10%, also in combination with glass fibers or bronze	not resistant when used with hot, concentrated sulfuric acid
PTFE filled with bronze	Good Sliding Properties And Wear Behavior Low Clod Flow Good Thermal Conductivity Lower Chemical Resistance High Pressure Resistance	up to 60%, also in combination with MoS2	may be attacked by acids and water
PTFE filled with organic fillers(high-performance thermoplastics)	outstanding sliding properties and wear behavior good chemical resistance high pressure resistance in some cases suitable for soft mating surface, e.g. aluminum non-abrasive	up to 20%, may be higher in combination with different fillers	depending on the respective filler