Demaisi Phenolic Fabric Guide Ring for Hydraulic Wear Ring

PFC-3
Kintowe phenolic fabric wear rings have the features of high abrasion resistance, high mechanical properties, low friction, minimal water absorption etc.

Send Inquiry

Description

During these years of development, we have witnessed the progress and improvement of China's Turquoise Polyester Fabric Resin Wear Rings, Thrust Washers, Composite Material Products. We accelerate the healthy development of the enterprise with good reputation and scientific management, continuously improve the professional level and service quality, and promote the progress of trade with perfect service and excellent professional quality. In order to adapt to the development of the new situation, the company has formulated long-term strategic goals and established corresponding departments. We establish a scientific and effective distribution system to motivate talents, provide multi-faceted training to help employees grow and become successful, and improve the overall quality of the workforce.

Our phenolic fabric wear rings are made from round tubes, which are composed of high-strength polyester fiber and phenolic resin under certain pressure and temperature.

Product parameter

Color	Light yellow to brown
Material	Phenolic resin reinforced with polyester fiber(PFC-3)
Density	1.2-1.4g/cm³	0.043-0.051lb/in³
Tensile Strength	40MPa	5800PSI
Ultimate Compressive Strength	320MPa	46400PSI
Impact Strength	210 J/m
Rockwell Hardness	80HRM
Coefficient of friction	0.20-0.40(Dry) 0.08-0.12(Oil)
Temperature	-40° to 130° C	-104° F to 266° F

Product application

Phenolic fabric wear rings and guide rings have a precise guiding effect on the piston and the piston rod moving in the hydraulic cylinder, and can absorb the radial force generated at any time. At the same time, the wear ring prevents metal contact in the sliding portion of the hydraulic cylinder. Phenolic fabric wear ring is used for where compressive strength and abrasion resistance of PTFE bearing strip is not sufficient.

Product details

Machining Tolerances

Height: 0/-0.30

Thickness: 0/-0.05

Outer diameter(OD): ±0.1

Inner diameter(ID): ±0.1

Cut gap could be in angle cut, butt cut, step cut

Outer diameter（OD）	≤100	100＜OD＜200	200≤OD＜400	400≤OD＜600
Cut gap	2	3	4	5
Limit deviation	±1	±1	±1	±1

Product Qualification

Piston guide rings

OD x ID x H	OD x ID x H	OD x ID x H	OD x ID x H
16 x 11 x 5.6	50 x 45 x 5.6	75 x 70 x 5.6	120 x 114 x 13
16 x 12.9 x 4	50 x 45 x 6.3	75 x 70 x 9.7	120 x 114 x 20
	50 x 45 x 9.7		120 x 114 x 30
18 x 13 x 5.6	50 x 46 x 12	80 x 72 x 12	120 x 114 x 40
18 x 14.9 x 4	50 x 46.9 x 4	80 x 74 x 13	120 x 115 x 9.7
		80 x 74 x 20
20 x 15 x 5.6	55 x 50 x 4	80 x 74 x 25	125 x 119 x 13
20 x 16.9 x 4	55 x 50 x 5.6		125 x 119 x 15
	55 x 50 x 9.7	80 x 75 x 5.6	125 x 119 x 20
25 x 20 x 5.6	55 x 50 x 25	80 x 75 x 9.7	125 x 119 x25
25 x 21.9 x 4		80 x 75 x 15	125 x 119 x 30
	60 x 54 x 10		125 x 120 x 9.7
30 x 24 x 10	60 x 54 x 13	85 x 79 x 30
30 x 25 x 5.6	60 x 54 x 20	85 x 80 x 5.6	130 x 124 x 13
30 x 26.9 x 4	60 x 54 x 30	85 x 80 x 9.7	130 x 124 x 30
			130 x 125 x 9.7
32 x 27 x 5.6	60 x 55 x 5.6	90 x 84 x 13
32 x 28.9 x 4	60 x 55 x 6.3	90 x 84 x 20	135 x 129 x 13
	60 x 55 x 9.7	90 x 85 x 5.6
35 x 30 x 5.6		90 x 85 x 9.7	140 x 134 x 13
35 x 31.9 x 4	63 x 57 x 13		140 x 134 x 20
	63 x 57 x 20	95 x 89 x 13	140 x 134 x 25
40 x 34 x 10	63 x 58 x 5.6	95 x 90 x 9.7	140 x 134 x 30
40 x 35 x 5.6	63 x 58 x 6.3		140 x 135 x 9.7
40 x 35 x 9.7	63 x 58 x 9.7	100 x 94 x 13	140 x 135 x 15
40 x 36 x 10	63 x 58 x 10	100 x 94 x 20
40 x 36.9 x 4		100 x 94 x 25	145 x 139 x 30
	65 x 59 x 13	100 x 94 x 30
45 x 39 x 10	65 x 59 x 20	100 x 95 x 9.7	150 x 144 x 13
45 x 40 x 5.6	65 x 60 x 5.6		150 x 144 x 20
45 x 41 x 12	65 x 60 x 9.7	110 x 104 x 13	150 x 144 x 30
45 x 41.9 x 4		110 x 104 x 20	150 x 144 x 40
	70 x 64 x 13	110 x 104 x 30	150 x 145 x 9.7
50 x 44 x 10	70 x 64 x 20	110 x 105 x 9.7	150 x 145 x 15
	70 x 65 x 5.6	110 x 105 x 15
	70 x 65 x 9.7		155 x 149 x 13
	70 x 65 x 20	115 x 109 x 13
		115 x 110 x 9.7
OD x ID x H	OD x ID x H	OD x ID x H
160 x 154 x 13	210 x 205 x 9.7	300 x 292 x 20
160 x 154 x 15	210 x 205 x 15	300 x 292 x 25
160 x 154 x 19.5		300 x 292 x 40
160 x 154 x 30	220 x 212 x 20	300 x 295 x 15
160 x 154 x 35	220 x 212 x 30	300 x 295 x 25
160 x 154 x 50	220 x 214 x 19.5
	220 x 214 x 30	400 x 392 x 30
160 x 155 x 9.7	220 x 215 x 9.7
160 x 155 x 15	220 x 215 x 15

170 x 160 x 20	230 x 225 x 15
170 x 164 x 19.5
170 x 164 x 20	240 x 232 x 25
170 x 164 x 30	240 x 232 x 40
170 x 165 x 9.7	240 x 235 x 9.7
170 x 165 x 15	240 x 235 x 15

180 x 172 x 40	250 x 242 x 20
180 x 174 x 13	250 x 242 x 25
180 x 174 x 19.5	250 x 242 x 40
180 x 174 x 30	250 x 244 x 19.5
180 x 175 x 9.7	250 x 244 x 50
180 x 175 x 15
	250 x 245 x 9.7
190 x 184 x 25	250 x 245 x 15
190 x 184 x 30
190 x 185 x 9.7	260 x 255 x 9.7
190 x 185 x 15	260 x 255 x 15

200 x 192 x 25	270 x 262 x 25
200 x 194 x 20	270 x 262 x 30
200 x 194 x 30
200 x 194 x 50	280 x 272 x 25
	280 x 275 x 15
200 x 195 x 9.7	280 x 275 x 25
200 x 195 x 15
200 x 195 x 20

Rod guide rings

ID x OD x H	ID x OD x H	ID x OD x H	ID x OD x H
12 x 15 x 6.3	30 x 33.1 x 4	45 x 49 x 15	65 x 70 x 9.7
12 x 15.1 x4	30 x 34 x 10	45 x 50 x 5.6	65 x 71 x 13
	30 x 35 x 5.6	45 x 50 x 9.7	65 x 71 x 20
14 x 17.1 x 4		45 x 51 x 13	65 x 71 x 40
	32 x 35 x 5.6	45 x 51 x 20
15 x 18.1 x 4	32 x 35.1 x 4.2	45 x 51 x 40	70 x 75 x 9.7
	32 x 36 x 10		70 x 76 x 13
16 x 19 x 6	32 x 36 x 15	50 x 55 x 5.6	70 x 76 x 20
16 x 19.1 x 4	32 x 36 x 20	50 x 55 x 9.7	70 x 76 x 30
16 x 20 x 10		50 x 55 x 15	70 x 76 x 40
	32 x 37 x 5.6	50 x 56 x 13	70 x 76 x 50
18 x 21.1 x 4	32 x 37 x 9.7	50 x 56 x 20
	32 x 38 x 10	50 x 56 x 30	75 x 80 x 9.7
20 x 23 x 10			75 x 81 x 13
20 x 23.1 x4	35 x 38 x 10	55 x 60 x 5.6	75 x 81 x 20
20 x 24 x 5.6	35 x 39 x 20	55 x 60 x 9.7	75 x 81 x 30
	35 x 40 x 5.6		75 x 81 x 60
22 x 25 x 10	35 x 40 x 9.7	56 x 61 x 5.6
22 x 25.1 x 4	35 x 41 x 10	56 x 61 x 9.7	80 x 85 x 9.7
		56 x 62 x 13	80 x 85 x 15
25 x 28 x 6	36 x 40 x 10	56 x 62 x 16	80 x 86 x 13
25 x 28 x 10	36 x 40 x 30	56 x 62 x 30	80 x 86 x 20
25 x 28 x 20	36 x 41 x 5.6	56 x 62 x 40
25 x 28.1 x 4	36 x 41 x 9.7		80 x 86 x 25
25 x 28.1 x 4.2	36 x 42 x 10	60 x 65 x 5.6	80 x 86 x 30
		60 x 65 x 9.7	80 x 86 x 40
25 x 29 x 5.6	40 x 43 x 5.6	60 x 65 x 15	80 x 86 x 50
25 x 29 x 10	40 x 44 x 10	60 x 66 x 13
25 x 29 x 20	40 x 44 x 20	60 x 66 x 20	85 x 90 x 9.7
25 x 30 x 5.6	40 x 44 x 25	60 x 66 x 30	85 x 90 x 15
25 x 31 x 10	40 x 45 x5.6		85 x 91 x 13
	40 x 45 x 9.7	63 x 68 x 5.6	85 x 91 x 20
28 x 31.1 x 4		63 x 68 x 9.7	85 x 91 x 25
28 x 32 x 10	40 x 46 x 10	63 x 68 x 15
28 x 33 x 5.6	40 x 46 x 15	63 x 69 x 13
28 x 34 x 10	40 x 46 x 20	63 x 69 x 20
	40 x 46 x 25	63 x 69 x 30

ID x OD x H	ID x OD x H	ID x OD x H
90 x 95 x 9.7	125 x 131 x 13	180 x 185 x 9.7
90 x 95 x 15	125 x 131 x 30	180 x 185 x 15
90 x 96 x 13	125 x 131 x 40	180 x 186 x 19.5
90 x 96 x 20	125 x 131 x 50
90 x 96 x 30		195 x 203 x 25
90 x 96 x 40	125 x 133 x 20
	125 x 133 x 30	200 x 205 x 15
95 x 100 x 9.7	125 x 133 x 45	200 x 205 x 25
95 x 100 x 15	125 x 133 x 60
		220 x 218 x 25
100 x 105 x 9.7	127 x 133 x 13
100 x 105 x 15		220 x 225 x 15
	130 x 135 x 9.7	220 x 225 x 25
100 x 106 x 13	130 x 135 x 15	220 x 228 x 25
100 x 106 x 20
100 x 106 x 25	135 x 141 x 90	235 x 243 x 30
100 x 106 x 30
100 x 106 x 40	140 x 145 x 9.7	250 x 255 x 15
100 x 106 x 50	140 x 145 x 15	250 x 255 x 25

105 x 111 x 20	140 x 146 x 13	255 x 263 x 25
	140 x 146 x 20
110 x 115 x 9.7	140 x 146 x 25	264 x 272 x 24
110 x 115 x 15	140 x 146 x 40
110 x 116 x 13	140 x148 x 20	305 x 313 x 25
110 x 116 x 20
110 x 116 x 30	150 x 155 x 9.7	365 x 373 x 35
	150 x 155 x 15
115 x 121 x 20	150 x 156 x 19.5
	150 x 156 x 30
120 x 125 x 9.7	150 x 158 x 20
120 x 125 x 15
120 x 126 x 40	160 x 165 x 9.7
120 x 126 x 50	160 x 165 x 15
	160 x 166 x 30
125 x 130 x 9.7	160 x 168 x 30
125 x 130 x 15	160 x 168 x 40

The company has an independent R&D department with superb R&D capability to provide customers with personalized Demaisi Phenolic Fabric Guide Ring for Hydraulic Wear Ring. Only from self design to product shaping, raw material procurement, product production, assembly, and forming a complete set of industrial chain can we do a good job in a product and an industry. The interests of customers are our first consideration. Our service pursues refinement. From pre-sale consultation, enthusiastic service to product promotion, we all require refinement.

Hot Tags: phenolic fabric wear rings, China, suppliers, manufacturers, factory, customized, bulk, pricelist, quotation, in stock, free sample, Hydraulic Cylinder Guide Rings Excavator Spare Parts, PTFE Guide Tapes, Semi Finished Products, Hydraulic Wear Ring for Piston and Rod, Hydraulic Guide Rings, Thrust Washers

Phenolic Fabric Resin Piston Wear Guide Ring

Competitve Price Polyester Wear Ring