Quality objectives have an irreplaceable effect on improving quality of PTFE Filled with Carbon Guide Tapes, Composite Thrust Plates, Dust Rings and operational effectiveness by other motivational methods. Our company is people-oriented, with system as the guarantee, pays attention to the cultivation and development of talents, and pays attention to the environmental protection of daily and production. Our company constantly innovates technology, develops new varieties, gradually realizes scientization and standardization, and speeds up the integration with the international market.
In most situations, PTFE is the perfect fluoroplastic for a wide range of applications. Though when virgin PTFE is not sufficient, you can choose for PTFE with a filler to obtain better properties.
Product parameter
PTFE with fillers | Influence of fillers | Filler content in % of weight | Limits of use |
PTFE filled with glass fibers | High Pressure And Wear Resistance As Well As Better Thermal Conductivity | up to 40% | resistant to organic solvents, non-resistant to alkaline solutions and acids |
PTFE filled with carbon fibers | Very Low Deformation Under Load | up to 25% | carbon fibers are chemically inert |
PTFE filled with carbon | High Pressure Resistance And Hardness | up to 35%, also in combination with graphite | compound is brittle filler may be attacked by oxidizing media |
PTFE filled with graphite | Good Lubricating Effect | typically up tp 5%, in exceptional cases up to 15%, also in combination with glass fibers or carbon | high abrasion when used with hard metals, is attached by oxidizing media |
PTFE filled with molybdenum disulfite(MoS2) | Good Sliding Properties And Wear Behavior | up to 10%, also in combination with glass fibers or bronze | not resistant when used with hot, concentrated sulfuric acid |
PTFE filled with bronze | Good Sliding Properties And Wear Behavior | up to 60%, also in combination with MoS2 | may be attacked by acids and water |
PTFE filled with organic fillers(high-performance thermoplastics) | outstanding sliding properties and wear behavior | up to 20%, may be higher in combination with different fillers | depending on the respective filler |
Product application
Semi-finished products of PTFE sealing parts
All components made from various formulas PTFE, such as bearings, bushings, seal rings, washers, friction rings and so on.
Product Qualification
We are willing to cooperate with you, devote ourselves to the development and application of Graphite Filled PTFE Tubes White and Black PTFE Tubes for Engineering, and establish long-term technical cooperation and business contacts. Along with our well-equipped hardware, we also strive to improve our software capabilities. We will continue to tackle difficulties in safety and environmental protection, and strive for breakthroughs in reform and innovation.
Hot Tags: filled PTFE tubes, China, suppliers, manufacturers, factory, customized, bulk, pricelist, quotation, in stock, free sample, Hydraulic Guide Ring for Piston and Rod, Dust Rings, Polyester Resin Guide Rings, Rod Guide Rings, Composite Thrust Bearings, Spherical Bearings
