Phenolic Resin Wear Ring of High-Strength Cloth-Reinforced

PFC-1
Kintowe phenolic resin wear rings have the features of good abrasion resistance, without metallic contact of the sliding surfaces, long lifetime, low repair cost, customers like SANY, Liugong, Lonking, Hengli etc.

Send Inquiry

Description

The company insists on independent innovation, attracts a group of well-known experts in the Thrust Washers, Dust Rings, PTFE Filled with Carbon Guide Tapes industry, sets up a core R&D team, and devotes itself to designing high-quality products. Our company not only brings direct taxation, employment promotion, and industrial chain driving effects to the country where it is located. For a long time, our company pays attention to research and development, and has always adhered to this purpose, committed to the production of high-performance, high-quality, high-tech products.

Our phenolic resin fabric wear rings are made from round phenolic resin tubes, which is a high-strength laminated material based upon the thermosetting phenolic resin reinforced with high-quality cotton fiber and finally finished with heat solidifying process under certain pressure and temperature.

Product parameter

Color	Light yellow to brown
Material	Phenolic resin reinforced with cotton fiber(PFC-1)
Density	1.2-1.4g/cm³	0.043-0.051lb/in³
Tensile Strength	45MPa	6525PSI
Ultimate Compressive Strength	256MPa	37120PSI
Impact Strength	26 J/m
Rockwell Hardness	95HRM
Coefficient of friction	0.23-0.46(Dry) 0.12-0.14(Oil)
Temperature	-40° to 130° C	-104° F to 266° F

Product application

Phenolic resin wear rings/guide rings are widely used in engineering machineries, such as Loaders, Excavators, Fork Lift Trucks…This material is suitable for Loaders.

Product details

Machining Tolerances

Height: 0/-0.30

Thickness: 0/-0.05

Outer diameter(OD): ±0.1

Inner diameter(ID): ±0.1

Cut gap could be in angle cut, butt cut, step cut

Outer diameter（OD）	≤100	100＜OD＜200	200≤OD＜400	400≤OD＜600
Cut gap	2	3	4	5
Limit deviation	±1	±1	±1	±1

Product Qualification

Piston guide rings

OD x ID x H	OD x ID x H	OD x ID x H	OD x ID x H
16 x 11 x 5.6	50 x 45 x 5.6	75 x 70 x 5.6	120 x 114 x 13
16 x 12.9 x 4	50 x 45 x 6.3	75 x 70 x 9.7	120 x 114 x 20
	50 x 45 x 9.7		120 x 114 x 30
18 x 13 x 5.6	50 x 46 x 12	80 x 72 x 12	120 x 114 x 40
18 x 14.9 x 4	50 x 46.9 x 4	80 x 74 x 13	120 x 115 x 9.7
		80 x 74 x 20
20 x 15 x 5.6	55 x 50 x 4	80 x 74 x 25	125 x 119 x 13
20 x 16.9 x 4	55 x 50 x 5.6		125 x 119 x 15
	55 x 50 x 9.7	80 x 75 x 5.6	125 x 119 x 20
25 x 20 x 5.6	55 x 50 x 25	80 x 75 x 9.7	125 x 119 x25
25 x 21.9 x 4		80 x 75 x 15	125 x 119 x 30
	60 x 54 x 10		125 x 120 x 9.7
30 x 24 x 10	60 x 54 x 13	85 x 79 x 30
30 x 25 x 5.6	60 x 54 x 20	85 x 80 x 5.6	130 x 124 x 13
30 x 26.9 x 4	60 x 54 x 30	85 x 80 x 9.7	130 x 124 x 30
			130 x 125 x 9.7
32 x 27 x 5.6	60 x 55 x 5.6	90 x 84 x 13
32 x 28.9 x 4	60 x 55 x 6.3	90 x 84 x 20	135 x 129 x 13
	60 x 55 x 9.7	90 x 85 x 5.6
35 x 30 x 5.6		90 x 85 x 9.7	140 x 134 x 13
35 x 31.9 x 4	63 x 57 x 13		140 x 134 x 20
	63 x 57 x 20	95 x 89 x 13	140 x 134 x 25
40 x 34 x 10	63 x 58 x 5.6	95 x 90 x 9.7	140 x 134 x 30
40 x 35 x 5.6	63 x 58 x 6.3		140 x 135 x 9.7
40 x 35 x 9.7	63 x 58 x 9.7	100 x 94 x 13	140 x 135 x 15
40 x 36 x 10	63 x 58 x 10	100 x 94 x 20
40 x 36.9 x 4		100 x 94 x 25	145 x 139 x 30
	65 x 59 x 13	100 x 94 x 30
45 x 39 x 10	65 x 59 x 20	100 x 95 x 9.7	150 x 144 x 13
45 x 40 x 5.6	65 x 60 x 5.6		150 x 144 x 20
45 x 41 x 12	65 x 60 x 9.7	110 x 104 x 13	150 x 144 x 30
45 x 41.9 x 4		110 x 104 x 20	150 x 144 x 40
	70 x 64 x 13	110 x 104 x 30	150 x 145 x 9.7
50 x 44 x 10	70 x 64 x 20	110 x 105 x 9.7	150 x 145 x 15
	70 x 65 x 5.6	110 x 105 x 15
	70 x 65 x 9.7		155 x 149 x 13
	70 x 65 x 20	115 x 109 x 13
		115 x 110 x 9.7
OD x ID x H	OD x ID x H	OD x ID x H
160 x 154 x 13	210 x 205 x 9.7	300 x 292 x 20
160 x 154 x 15	210 x 205 x 15	300 x 292 x 25
160 x 154 x 19.5		300 x 292 x 40
160 x 154 x 30	220 x 212 x 20	300 x 295 x 15
160 x 154 x 35	220 x 212 x 30	300 x 295 x 25
160 x 154 x 50	220 x 214 x 19.5
	220 x 214 x 30	400 x 392 x 30
160 x 155 x 9.7	220 x 215 x 9.7
160 x 155 x 15	220 x 215 x 15

170 x 160 x 20	230 x 225 x 15
170 x 164 x 19.5
170 x 164 x 20	240 x 232 x 25
170 x 164 x 30	240 x 232 x 40
170 x 165 x 9.7	240 x 235 x 9.7
170 x 165 x 15	240 x 235 x 15

180 x 172 x 40	250 x 242 x 20
180 x 174 x 13	250 x 242 x 25
180 x 174 x 19.5	250 x 242 x 40
180 x 174 x 30	250 x 244 x 19.5
180 x 175 x 9.7	250 x 244 x 50
180 x 175 x 15
	250 x 245 x 9.7
190 x 184 x 25	250 x 245 x 15
190 x 184 x 30
190 x 185 x 9.7	260 x 255 x 9.7
190 x 185 x 15	260 x 255 x 15

200 x 192 x 25	270 x 262 x 25
200 x 194 x 20	270 x 262 x 30
200 x 194 x 30
200 x 194 x 50	280 x 272 x 25
	280 x 275 x 15
200 x 195 x 9.7	280 x 275 x 25
200 x 195 x 15
200 x 195 x 20

Rod guide rings

ID x OD x H	ID x OD x H	ID x OD x H	ID x OD x H
12 x 15 x 6.3	30 x 33.1 x 4	45 x 49 x 15	65 x 70 x 9.7
12 x 15.1 x4	30 x 34 x 10	45 x 50 x 5.6	65 x 71 x 13
	30 x 35 x 5.6	45 x 50 x 9.7	65 x 71 x 20
14 x 17.1 x 4		45 x 51 x 13	65 x 71 x 40
	32 x 35 x 5.6	45 x 51 x 20
15 x 18.1 x 4	32 x 35.1 x 4.2	45 x 51 x 40	70 x 75 x 9.7
	32 x 36 x 10		70 x 76 x 13
16 x 19 x 6	32 x 36 x 15	50 x 55 x 5.6	70 x 76 x 20
16 x 19.1 x 4	32 x 36 x 20	50 x 55 x 9.7	70 x 76 x 30
16 x 20 x 10		50 x 55 x 15	70 x 76 x 40
	32 x 37 x 5.6	50 x 56 x 13	70 x 76 x 50
18 x 21.1 x 4	32 x 37 x 9.7	50 x 56 x 20
	32 x 38 x 10	50 x 56 x 30	75 x 80 x 9.7
20 x 23 x 10			75 x 81 x 13
20 x 23.1 x4	35 x 38 x 10	55 x 60 x 5.6	75 x 81 x 20
20 x 24 x 5.6	35 x 39 x 20	55 x 60 x 9.7	75 x 81 x 30
	35 x 40 x 5.6		75 x 81 x 60
22 x 25 x 10	35 x 40 x 9.7	56 x 61 x 5.6
22 x 25.1 x 4	35 x 41 x 10	56 x 61 x 9.7	80 x 85 x 9.7
		56 x 62 x 13	80 x 85 x 15
25 x 28 x 6	36 x 40 x 10	56 x 62 x 16	80 x 86 x 13
25 x 28 x 10	36 x 40 x 30	56 x 62 x 30	80 x 86 x 20
25 x 28 x 20	36 x 41 x 5.6	56 x 62 x 40
25 x 28.1 x 4	36 x 41 x 9.7		80 x 86 x 25
25 x 28.1 x 4.2	36 x 42 x 10	60 x 65 x 5.6	80 x 86 x 30
		60 x 65 x 9.7	80 x 86 x 40
25 x 29 x 5.6	40 x 43 x 5.6	60 x 65 x 15	80 x 86 x 50
25 x 29 x 10	40 x 44 x 10	60 x 66 x 13
25 x 29 x 20	40 x 44 x 20	60 x 66 x 20	85 x 90 x 9.7
25 x 30 x 5.6	40 x 44 x 25	60 x 66 x 30	85 x 90 x 15
25 x 31 x 10	40 x 45 x5.6		85 x 91 x 13
	40 x 45 x 9.7	63 x 68 x 5.6	85 x 91 x 20
28 x 31.1 x 4		63 x 68 x 9.7	85 x 91 x 25
28 x 32 x 10	40 x 46 x 10	63 x 68 x 15
28 x 33 x 5.6	40 x 46 x 15	63 x 69 x 13
28 x 34 x 10	40 x 46 x 20	63 x 69 x 20
	40 x 46 x 25	63 x 69 x 30

ID x OD x H	ID x OD x H	ID x OD x H
90 x 95 x 9.7	125 x 131 x 13	180 x 185 x 9.7
90 x 95 x 15	125 x 131 x 30	180 x 185 x 15
90 x 96 x 13	125 x 131 x 40	180 x 186 x 19.5
90 x 96 x 20	125 x 131 x 50
90 x 96 x 30		195 x 203 x 25
90 x 96 x 40	125 x 133 x 20
	125 x 133 x 30	200 x 205 x 15
95 x 100 x 9.7	125 x 133 x 45	200 x 205 x 25
95 x 100 x 15	125 x 133 x 60
		220 x 218 x 25
100 x 105 x 9.7	127 x 133 x 13
100 x 105 x 15		220 x 225 x 15
	130 x 135 x 9.7	220 x 225 x 25
100 x 106 x 13	130 x 135 x 15	220 x 228 x 25
100 x 106 x 20
100 x 106 x 25	135 x 141 x 90	235 x 243 x 30
100 x 106 x 30
100 x 106 x 40	140 x 145 x 9.7	250 x 255 x 15
100 x 106 x 50	140 x 145 x 15	250 x 255 x 25

105 x 111 x 20	140 x 146 x 13	255 x 263 x 25
	140 x 146 x 20
110 x 115 x 9.7	140 x 146 x 25	264 x 272 x 24
110 x 115 x 15	140 x 146 x 40
110 x 116 x 13	140 x148 x 20	305 x 313 x 25
110 x 116 x 20
110 x 116 x 30	150 x 155 x 9.7	365 x 373 x 35
	150 x 155 x 15
115 x 121 x 20	150 x 156 x 19.5
	150 x 156 x 30
120 x 125 x 9.7	150 x 158 x 20
120 x 125 x 15
120 x 126 x 40	160 x 165 x 9.7
120 x 126 x 50	160 x 165 x 15
	160 x 166 x 30
125 x 130 x 9.7	160 x 168 x 30
125 x 130 x 15	160 x 168 x 40

Our company adheres to the continuous improvement of product design and service quality, tries everything possible to meet the needs of customers and provides customers with high-quality Phenolic Resin Wear Ring of High-Strength Cloth-Reinforced and services. Our business model of integrating design, R&D and manufacturing enables us to provide total solutions for our customers, making product quality better and creating higher value for our customers. We embrace our ideals, follow the guidance of our faith, and make strides towards the grand goal of a successful modern enterprise!

Hot Tags: phenolic resin wear rings, China, suppliers, manufacturers, factory, customized, bulk, pricelist, quotation, in stock, free sample, Composite Thrust Plates, Wear Ring Used for Excavator Cylinder, Composite Thrust Bearings, Flange Bearings, Hydraulic Cylinder Guide Rings Excavator Spare Parts, Hydraulic Guide Ring for Piston and Rod

Heat Resistant Fiber, High Temperature Ceramic Fiber, Non-Asbestos Ring

High Precision Machining OEM Turning Milling Concentric CNC Oblique Guide CNC Machine Multi-Turning Auto Metal Thin-Wall Ring