Small/Large O Ring Sizes with Handbook Guide

PFC-3
Kintowe phenolic fabric wear rings have the features of high abrasion resistance, high mechanical properties, low friction, minimal water absorption etc.

Send Inquiry

Description

Through the introduction of high-tech equipment and manufacturing technology, relying on premium products and perfect after-sales service, we continuously increase market share and strive to become a high-quality Guide Rings, Composite Bushings, Bearings supplier in the industry. We provide our customers with the most suitable production needs, the best quality products and the most satisfactory after-sales service. Our company will compete with many multinational companies in a larger market, and the speed of enterprise response becomes the key to win the market. The development of our company coalesces the hard work and wisdom of all the staff of the company, and also coalesces the deep love of the majority of consumers, and moreover inspires the belief of all the staff of the company to strive for courage.

Our phenolic fabric wear rings are made from round tubes, which are composed of high-strength polyester fiber and phenolic resin under certain pressure and temperature.

Product parameter

Color	Light yellow to brown
Material	Phenolic resin reinforced with polyester fiber(PFC-3)
Density	1.2-1.4g/cm³	0.043-0.051lb/in³
Tensile Strength	40MPa	5800PSI
Ultimate Compressive Strength	320MPa	46400PSI
Impact Strength	210 J/m
Rockwell Hardness	80HRM
Coefficient of friction	0.20-0.40(Dry) 0.08-0.12(Oil)
Temperature	-40° to 130° C	-104° F to 266° F

Product application

Phenolic fabric wear rings and guide rings have a precise guiding effect on the piston and the piston rod moving in the hydraulic cylinder, and can absorb the radial force generated at any time. At the same time, the wear ring prevents metal contact in the sliding portion of the hydraulic cylinder. Phenolic fabric wear ring is used for where compressive strength and abrasion resistance of PTFE bearing strip is not sufficient.

Product details

Machining Tolerances

Height: 0/-0.30

Thickness: 0/-0.05

Outer diameter(OD): ±0.1

Inner diameter(ID): ±0.1

Cut gap could be in angle cut, butt cut, step cut

Outer diameter（OD）	≤100	100＜OD＜200	200≤OD＜400	400≤OD＜600
Cut gap	2	3	4	5
Limit deviation	±1	±1	±1	±1

Product Qualification

Piston guide rings

OD x ID x H	OD x ID x H	OD x ID x H	OD x ID x H
16 x 11 x 5.6	50 x 45 x 5.6	75 x 70 x 5.6	120 x 114 x 13
16 x 12.9 x 4	50 x 45 x 6.3	75 x 70 x 9.7	120 x 114 x 20
	50 x 45 x 9.7		120 x 114 x 30
18 x 13 x 5.6	50 x 46 x 12	80 x 72 x 12	120 x 114 x 40
18 x 14.9 x 4	50 x 46.9 x 4	80 x 74 x 13	120 x 115 x 9.7
		80 x 74 x 20
20 x 15 x 5.6	55 x 50 x 4	80 x 74 x 25	125 x 119 x 13
20 x 16.9 x 4	55 x 50 x 5.6		125 x 119 x 15
	55 x 50 x 9.7	80 x 75 x 5.6	125 x 119 x 20
25 x 20 x 5.6	55 x 50 x 25	80 x 75 x 9.7	125 x 119 x25
25 x 21.9 x 4		80 x 75 x 15	125 x 119 x 30
	60 x 54 x 10		125 x 120 x 9.7
30 x 24 x 10	60 x 54 x 13	85 x 79 x 30
30 x 25 x 5.6	60 x 54 x 20	85 x 80 x 5.6	130 x 124 x 13
30 x 26.9 x 4	60 x 54 x 30	85 x 80 x 9.7	130 x 124 x 30
			130 x 125 x 9.7
32 x 27 x 5.6	60 x 55 x 5.6	90 x 84 x 13
32 x 28.9 x 4	60 x 55 x 6.3	90 x 84 x 20	135 x 129 x 13
	60 x 55 x 9.7	90 x 85 x 5.6
35 x 30 x 5.6		90 x 85 x 9.7	140 x 134 x 13
35 x 31.9 x 4	63 x 57 x 13		140 x 134 x 20
	63 x 57 x 20	95 x 89 x 13	140 x 134 x 25
40 x 34 x 10	63 x 58 x 5.6	95 x 90 x 9.7	140 x 134 x 30
40 x 35 x 5.6	63 x 58 x 6.3		140 x 135 x 9.7
40 x 35 x 9.7	63 x 58 x 9.7	100 x 94 x 13	140 x 135 x 15
40 x 36 x 10	63 x 58 x 10	100 x 94 x 20
40 x 36.9 x 4		100 x 94 x 25	145 x 139 x 30
	65 x 59 x 13	100 x 94 x 30
45 x 39 x 10	65 x 59 x 20	100 x 95 x 9.7	150 x 144 x 13
45 x 40 x 5.6	65 x 60 x 5.6		150 x 144 x 20
45 x 41 x 12	65 x 60 x 9.7	110 x 104 x 13	150 x 144 x 30
45 x 41.9 x 4		110 x 104 x 20	150 x 144 x 40
	70 x 64 x 13	110 x 104 x 30	150 x 145 x 9.7
50 x 44 x 10	70 x 64 x 20	110 x 105 x 9.7	150 x 145 x 15
	70 x 65 x 5.6	110 x 105 x 15
	70 x 65 x 9.7		155 x 149 x 13
	70 x 65 x 20	115 x 109 x 13
		115 x 110 x 9.7
OD x ID x H	OD x ID x H	OD x ID x H
160 x 154 x 13	210 x 205 x 9.7	300 x 292 x 20
160 x 154 x 15	210 x 205 x 15	300 x 292 x 25
160 x 154 x 19.5		300 x 292 x 40
160 x 154 x 30	220 x 212 x 20	300 x 295 x 15
160 x 154 x 35	220 x 212 x 30	300 x 295 x 25
160 x 154 x 50	220 x 214 x 19.5
	220 x 214 x 30	400 x 392 x 30
160 x 155 x 9.7	220 x 215 x 9.7
160 x 155 x 15	220 x 215 x 15

170 x 160 x 20	230 x 225 x 15
170 x 164 x 19.5
170 x 164 x 20	240 x 232 x 25
170 x 164 x 30	240 x 232 x 40
170 x 165 x 9.7	240 x 235 x 9.7
170 x 165 x 15	240 x 235 x 15

180 x 172 x 40	250 x 242 x 20
180 x 174 x 13	250 x 242 x 25
180 x 174 x 19.5	250 x 242 x 40
180 x 174 x 30	250 x 244 x 19.5
180 x 175 x 9.7	250 x 244 x 50
180 x 175 x 15
	250 x 245 x 9.7
190 x 184 x 25	250 x 245 x 15
190 x 184 x 30
190 x 185 x 9.7	260 x 255 x 9.7
190 x 185 x 15	260 x 255 x 15

200 x 192 x 25	270 x 262 x 25
200 x 194 x 20	270 x 262 x 30
200 x 194 x 30
200 x 194 x 50	280 x 272 x 25
	280 x 275 x 15
200 x 195 x 9.7	280 x 275 x 25
200 x 195 x 15
200 x 195 x 20

Rod guide rings

ID x OD x H	ID x OD x H	ID x OD x H	ID x OD x H
12 x 15 x 6.3	30 x 33.1 x 4	45 x 49 x 15	65 x 70 x 9.7
12 x 15.1 x4	30 x 34 x 10	45 x 50 x 5.6	65 x 71 x 13
	30 x 35 x 5.6	45 x 50 x 9.7	65 x 71 x 20
14 x 17.1 x 4		45 x 51 x 13	65 x 71 x 40
	32 x 35 x 5.6	45 x 51 x 20
15 x 18.1 x 4	32 x 35.1 x 4.2	45 x 51 x 40	70 x 75 x 9.7
	32 x 36 x 10		70 x 76 x 13
16 x 19 x 6	32 x 36 x 15	50 x 55 x 5.6	70 x 76 x 20
16 x 19.1 x 4	32 x 36 x 20	50 x 55 x 9.7	70 x 76 x 30
16 x 20 x 10		50 x 55 x 15	70 x 76 x 40
	32 x 37 x 5.6	50 x 56 x 13	70 x 76 x 50
18 x 21.1 x 4	32 x 37 x 9.7	50 x 56 x 20
	32 x 38 x 10	50 x 56 x 30	75 x 80 x 9.7
20 x 23 x 10			75 x 81 x 13
20 x 23.1 x4	35 x 38 x 10	55 x 60 x 5.6	75 x 81 x 20
20 x 24 x 5.6	35 x 39 x 20	55 x 60 x 9.7	75 x 81 x 30
	35 x 40 x 5.6		75 x 81 x 60
22 x 25 x 10	35 x 40 x 9.7	56 x 61 x 5.6
22 x 25.1 x 4	35 x 41 x 10	56 x 61 x 9.7	80 x 85 x 9.7
		56 x 62 x 13	80 x 85 x 15
25 x 28 x 6	36 x 40 x 10	56 x 62 x 16	80 x 86 x 13
25 x 28 x 10	36 x 40 x 30	56 x 62 x 30	80 x 86 x 20
25 x 28 x 20	36 x 41 x 5.6	56 x 62 x 40
25 x 28.1 x 4	36 x 41 x 9.7		80 x 86 x 25
25 x 28.1 x 4.2	36 x 42 x 10	60 x 65 x 5.6	80 x 86 x 30
		60 x 65 x 9.7	80 x 86 x 40
25 x 29 x 5.6	40 x 43 x 5.6	60 x 65 x 15	80 x 86 x 50
25 x 29 x 10	40 x 44 x 10	60 x 66 x 13
25 x 29 x 20	40 x 44 x 20	60 x 66 x 20	85 x 90 x 9.7
25 x 30 x 5.6	40 x 44 x 25	60 x 66 x 30	85 x 90 x 15
25 x 31 x 10	40 x 45 x5.6		85 x 91 x 13
	40 x 45 x 9.7	63 x 68 x 5.6	85 x 91 x 20
28 x 31.1 x 4		63 x 68 x 9.7	85 x 91 x 25
28 x 32 x 10	40 x 46 x 10	63 x 68 x 15
28 x 33 x 5.6	40 x 46 x 15	63 x 69 x 13
28 x 34 x 10	40 x 46 x 20	63 x 69 x 20
	40 x 46 x 25	63 x 69 x 30

ID x OD x H	ID x OD x H	ID x OD x H
90 x 95 x 9.7	125 x 131 x 13	180 x 185 x 9.7
90 x 95 x 15	125 x 131 x 30	180 x 185 x 15
90 x 96 x 13	125 x 131 x 40	180 x 186 x 19.5
90 x 96 x 20	125 x 131 x 50
90 x 96 x 30		195 x 203 x 25
90 x 96 x 40	125 x 133 x 20
	125 x 133 x 30	200 x 205 x 15
95 x 100 x 9.7	125 x 133 x 45	200 x 205 x 25
95 x 100 x 15	125 x 133 x 60
		220 x 218 x 25
100 x 105 x 9.7	127 x 133 x 13
100 x 105 x 15		220 x 225 x 15
	130 x 135 x 9.7	220 x 225 x 25
100 x 106 x 13	130 x 135 x 15	220 x 228 x 25
100 x 106 x 20
100 x 106 x 25	135 x 141 x 90	235 x 243 x 30
100 x 106 x 30
100 x 106 x 40	140 x 145 x 9.7	250 x 255 x 15
100 x 106 x 50	140 x 145 x 15	250 x 255 x 25

105 x 111 x 20	140 x 146 x 13	255 x 263 x 25
	140 x 146 x 20
110 x 115 x 9.7	140 x 146 x 25	264 x 272 x 24
110 x 115 x 15	140 x 146 x 40
110 x 116 x 13	140 x148 x 20	305 x 313 x 25
110 x 116 x 20
110 x 116 x 30	150 x 155 x 9.7	365 x 373 x 35
	150 x 155 x 15
115 x 121 x 20	150 x 156 x 19.5
	150 x 156 x 30
120 x 125 x 9.7	150 x 158 x 20
120 x 125 x 15
120 x 126 x 40	160 x 165 x 9.7
120 x 126 x 50	160 x 165 x 15
	160 x 166 x 30
125 x 130 x 9.7	160 x 168 x 30
125 x 130 x 15	160 x 168 x 40

We hope to provide service guidance for the promotion and development of enterprise Small/Large O Ring Sizes with Handbook Guide through professional level and unremitting efforts and bring high-quality services and products to users. We respect everyone associated with the company, including employees, partners and customers, give full play to everyone's wisdom, unite everyone's heart and gather the strength of all parties with the cohesion of the enterprise. We are committed to contributing to the sustainable development of the industry and adding green to the earth on which mankind depends.

Hot Tags: phenolic fabric wear rings, China, suppliers, manufacturers, factory, customized, bulk, pricelist, quotation, in stock, free sample, Hydraulic Cylinder Wear Ring Seals, PTFE Products, Polyester Resin Guide Rings, Wear Ring Used for Excavator Cylinder, Glyd Rings, Inner Spherical Ball

Phenolic Fabric Resin Piston Wear Guide Ring

Competitve Price Polyester Wear Ring