Piston Rod Seal PTFE Guide Strip/Tape Guide Ring

PFC-7
Kintowe rod guide rings have excellent compressive, tensile, wear, fire, heat and chemical corrosion resistant property, can adapt to the complex working conditions.

Send Inquiry

Description

We will use mature technology and advanced equipment to meet the various requirements of our customers for our Guide Rings for Hydraulic Cylinders, Bushings, Guide Rings. We believe that in addition to providing products with good quality and low price in order to contribute to economic development, we should also take care of our employees and partners. Over the years, under the strong leadership and care and support of the group, the company has implemented the group's "one responsibility, three changes" management system of "work proceduralization, quality standardization, and behavior standardization with the economic target responsibility system as the core"

In hydraulic cylinders the most commonly used guides are guide rings and guide strips. They accommodate radial loads of forces acting on the cylinder assembly and guide the rod in the cylinder head as well as the piston in the cylinder bore.

Our rod guide rings are made from round phenolic resin tubes, which is based on modified phenolic resin reinforced with ultra strong special fiber, added with solid lubricants, processed under certain temperature and pressure. Compare to other fiber-reinforced (cotton fiber, polyester fiber, polyamide fiber and so on) phenolic products, this material has the largest compressive strength, it is suitable used as back-up rings for mine, coal machinery and equipment.

work more smoothly against the cylinder bore and the sealing surfaces

high resistance to insufficient lubrication at low speeds

certain self-lubricating properties

significantly longer service life

Product parameter

Color	Grey
Material	Phenolic resin reinforced with ultra strong special fiber PFC-7)
Density	1.2-1.4g/cm³	0.043-0.051lb/in³
Tensile Strength	74MPa	10730PSI
Ultimate Compressive Strength	460MPa	66700PSI
Impact Strength	45 J/m
Rockwell Hardness	110HRM
Coefficient of friction	0.15-0.25(Dry) 0.07-0.12(Oil)
Temperature	-40° to 200° C	-104° to 392° F

Product application

Kintowe rod guide rings are precision machined according to tight tolerance specifications on the radial section of the guide. Therefore, they optimize guide load distribution and limit radial misalignment of components for best seal performance.

Product details

Machining Tolerances

Height: 0/-0.30

Thickness: 0/-0.05

Outer diameter(OD): ±0.1

Inner diameter(ID): ±0.1

Cut gap could be in angle cut, butt cut, step cut

Outer diameter（OD）	≤100	100＜OD＜200	200≤OD＜400	400≤OD＜600
Cut gap	2	3	4	5
Limit deviation	±1	±1	±1	±1

Product Qualification

Piston guide rings

OD x ID x H	OD x ID x H	OD x ID x H	OD x ID x H
16 x 11 x 5.6	50 x 45 x 5.6	75 x 70 x 5.6	120 x 114 x 13
16 x 12.9 x 4	50 x 45 x 6.3	75 x 70 x 9.7	120 x 114 x 20
	50 x 45 x 9.7		120 x 114 x 30
18 x 13 x 5.6	50 x 46 x 12	80 x 72 x 12	120 x 114 x 40
18 x 14.9 x 4	50 x 46.9 x 4	80 x 74 x 13	120 x 115 x 9.7
		80 x 74 x 20
20 x 15 x 5.6	55 x 50 x 4	80 x 74 x 25	125 x 119 x 13
20 x 16.9 x 4	55 x 50 x 5.6		125 x 119 x 15
	55 x 50 x 9.7	80 x 75 x 5.6	125 x 119 x 20
25 x 20 x 5.6	55 x 50 x 25	80 x 75 x 9.7	125 x 119 x25
25 x 21.9 x 4		80 x 75 x 15	125 x 119 x 30
	60 x 54 x 10		125 x 120 x 9.7
30 x 24 x 10	60 x 54 x 13	85 x 79 x 30
30 x 25 x 5.6	60 x 54 x 20	85 x 80 x 5.6	130 x 124 x 13
30 x 26.9 x 4	60 x 54 x 30	85 x 80 x 9.7	130 x 124 x 30
			130 x 125 x 9.7
32 x 27 x 5.6	60 x 55 x 5.6	90 x 84 x 13
32 x 28.9 x 4	60 x 55 x 6.3	90 x 84 x 20	135 x 129 x 13
	60 x 55 x 9.7	90 x 85 x 5.6
35 x 30 x 5.6		90 x 85 x 9.7	140 x 134 x 13
35 x 31.9 x 4	63 x 57 x 13		140 x 134 x 20
	63 x 57 x 20	95 x 89 x 13	140 x 134 x 25
40 x 34 x 10	63 x 58 x 5.6	95 x 90 x 9.7	140 x 134 x 30
40 x 35 x 5.6	63 x 58 x 6.3		140 x 135 x 9.7
40 x 35 x 9.7	63 x 58 x 9.7	100 x 94 x 13	140 x 135 x 15
40 x 36 x 10	63 x 58 x 10	100 x 94 x 20
40 x 36.9 x 4		100 x 94 x 25	145 x 139 x 30
	65 x 59 x 13	100 x 94 x 30
45 x 39 x 10	65 x 59 x 20	100 x 95 x 9.7	150 x 144 x 13
45 x 40 x 5.6	65 x 60 x 5.6		150 x 144 x 20
45 x 41 x 12	65 x 60 x 9.7	110 x 104 x 13	150 x 144 x 30
45 x 41.9 x 4		110 x 104 x 20	150 x 144 x 40
	70 x 64 x 13	110 x 104 x 30	150 x 145 x 9.7
50 x 44 x 10	70 x 64 x 20	110 x 105 x 9.7	150 x 145 x 15
	70 x 65 x 5.6	110 x 105 x 15
	70 x 65 x 9.7		155 x 149 x 13
	70 x 65 x 20	115 x 109 x 13
		115 x 110 x 9.7
OD x ID x H	OD x ID x H	OD x ID x H
160 x 154 x 13	210 x 205 x 9.7	300 x 292 x 20
160 x 154 x 15	210 x 205 x 15	300 x 292 x 25
160 x 154 x 19.5		300 x 292 x 40
160 x 154 x 30	220 x 212 x 20	300 x 295 x 15
160 x 154 x 35	220 x 212 x 30	300 x 295 x 25
160 x 154 x 50	220 x 214 x 19.5
	220 x 214 x 30	400 x 392 x 30
160 x 155 x 9.7	220 x 215 x 9.7
160 x 155 x 15	220 x 215 x 15

170 x 160 x 20	230 x 225 x 15
170 x 164 x 19.5
170 x 164 x 20	240 x 232 x 25
170 x 164 x 30	240 x 232 x 40
170 x 165 x 9.7	240 x 235 x 9.7
170 x 165 x 15	240 x 235 x 15

180 x 172 x 40	250 x 242 x 20
180 x 174 x 13	250 x 242 x 25
180 x 174 x 19.5	250 x 242 x 40
180 x 174 x 30	250 x 244 x 19.5
180 x 175 x 9.7	250 x 244 x 50
180 x 175 x 15
	250 x 245 x 9.7
190 x 184 x 25	250 x 245 x 15
190 x 184 x 30
190 x 185 x 9.7	260 x 255 x 9.7
190 x 185 x 15	260 x 255 x 15

200 x 192 x 25	270 x 262 x 25
200 x 194 x 20	270 x 262 x 30
200 x 194 x 30
200 x 194 x 50	280 x 272 x 25
	280 x 275 x 15
200 x 195 x 9.7	280 x 275 x 25
200 x 195 x 15
200 x 195 x 20

Rod guide rings

ID x OD x H	ID x OD x H	ID x OD x H	ID x OD x H
12 x 15 x 6.3	30 x 33.1 x 4	45 x 49 x 15	65 x 70 x 9.7
12 x 15.1 x4	30 x 34 x 10	45 x 50 x 5.6	65 x 71 x 13
	30 x 35 x 5.6	45 x 50 x 9.7	65 x 71 x 20
14 x 17.1 x 4		45 x 51 x 13	65 x 71 x 40
	32 x 35 x 5.6	45 x 51 x 20
15 x 18.1 x 4	32 x 35.1 x 4.2	45 x 51 x 40	70 x 75 x 9.7
	32 x 36 x 10		70 x 76 x 13
16 x 19 x 6	32 x 36 x 15	50 x 55 x 5.6	70 x 76 x 20
16 x 19.1 x 4	32 x 36 x 20	50 x 55 x 9.7	70 x 76 x 30
16 x 20 x 10		50 x 55 x 15	70 x 76 x 40
	32 x 37 x 5.6	50 x 56 x 13	70 x 76 x 50
18 x 21.1 x 4	32 x 37 x 9.7	50 x 56 x 20
	32 x 38 x 10	50 x 56 x 30	75 x 80 x 9.7
20 x 23 x 10			75 x 81 x 13
20 x 23.1 x4	35 x 38 x 10	55 x 60 x 5.6	75 x 81 x 20
20 x 24 x 5.6	35 x 39 x 20	55 x 60 x 9.7	75 x 81 x 30
	35 x 40 x 5.6		75 x 81 x 60
22 x 25 x 10	35 x 40 x 9.7	56 x 61 x 5.6
22 x 25.1 x 4	35 x 41 x 10	56 x 61 x 9.7	80 x 85 x 9.7
		56 x 62 x 13	80 x 85 x 15
25 x 28 x 6	36 x 40 x 10	56 x 62 x 16	80 x 86 x 13
25 x 28 x 10	36 x 40 x 30	56 x 62 x 30	80 x 86 x 20
25 x 28 x 20	36 x 41 x 5.6	56 x 62 x 40
25 x 28.1 x 4	36 x 41 x 9.7		80 x 86 x 25
25 x 28.1 x 4.2	36 x 42 x 10	60 x 65 x 5.6	80 x 86 x 30
		60 x 65 x 9.7	80 x 86 x 40
25 x 29 x 5.6	40 x 43 x 5.6	60 x 65 x 15	80 x 86 x 50
25 x 29 x 10	40 x 44 x 10	60 x 66 x 13
25 x 29 x 20	40 x 44 x 20	60 x 66 x 20	85 x 90 x 9.7
25 x 30 x 5.6	40 x 44 x 25	60 x 66 x 30	85 x 90 x 15
25 x 31 x 10	40 x 45 x5.6		85 x 91 x 13
	40 x 45 x 9.7	63 x 68 x 5.6	85 x 91 x 20
28 x 31.1 x 4		63 x 68 x 9.7	85 x 91 x 25
28 x 32 x 10	40 x 46 x 10	63 x 68 x 15
28 x 33 x 5.6	40 x 46 x 15	63 x 69 x 13
28 x 34 x 10	40 x 46 x 20	63 x 69 x 20
	40 x 46 x 25	63 x 69 x 30

ID x OD x H	ID x OD x H	ID x OD x H
90 x 95 x 9.7	125 x 131 x 13	180 x 185 x 9.7
90 x 95 x 15	125 x 131 x 30	180 x 185 x 15
90 x 96 x 13	125 x 131 x 40	180 x 186 x 19.5
90 x 96 x 20	125 x 131 x 50
90 x 96 x 30		195 x 203 x 25
90 x 96 x 40	125 x 133 x 20
	125 x 133 x 30	200 x 205 x 15
95 x 100 x 9.7	125 x 133 x 45	200 x 205 x 25
95 x 100 x 15	125 x 133 x 60
		220 x 218 x 25
100 x 105 x 9.7	127 x 133 x 13
100 x 105 x 15		220 x 225 x 15
	130 x 135 x 9.7	220 x 225 x 25
100 x 106 x 13	130 x 135 x 15	220 x 228 x 25
100 x 106 x 20
100 x 106 x 25	135 x 141 x 90	235 x 243 x 30
100 x 106 x 30
100 x 106 x 40	140 x 145 x 9.7	250 x 255 x 15
100 x 106 x 50	140 x 145 x 15	250 x 255 x 25

105 x 111 x 20	140 x 146 x 13	255 x 263 x 25
	140 x 146 x 20
110 x 115 x 9.7	140 x 146 x 25	264 x 272 x 24
110 x 115 x 15	140 x 146 x 40
110 x 116 x 13	140 x148 x 20	305 x 313 x 25
110 x 116 x 20
110 x 116 x 30	150 x 155 x 9.7	365 x 373 x 35
	150 x 155 x 15
115 x 121 x 20	150 x 156 x 19.5
	150 x 156 x 30
120 x 125 x 9.7	150 x 158 x 20
120 x 125 x 15
120 x 126 x 40	160 x 165 x 9.7
120 x 126 x 50	160 x 165 x 15
	160 x 166 x 30
125 x 130 x 9.7	160 x 168 x 30
125 x 130 x 15	160 x 168 x 40

In the continuous communication with users, we constantly optimize the humanized design, function and overall design of Piston Rod Seal PTFE Guide Strip/Tape Guide Ring. We welcome new and previous customers from all walks of lifestyle to contact us for long run organization relationships and mutual achievements. To maintain our competitive advantage in the industry, we must continue to have a first-class talent team in the industry to promote the sustainable development of the company in the future.

Hot Tags: rod guide rings, China, suppliers, manufacturers, factory, customized, bulk, pricelist, quotation, in stock, free sample, Inner Spherical Ball, PTFE Guide Strips, Rod Wear Rings, Hydraulic Cylinder Wear Ring Seals, Hydraulic Cylinder Guide Rings Excavator Spare Parts, Wear Rings

Graphite Bronze Carbon Fibre Filled PTFE Piston Ring Filled Guide Wear Ring

PTFE+Brozne/Carbon/Graphite/Glass Wear Guide Ring for Hydraulic